Giotto Dual Boiler Pid – GEV2BPID
The Professional 2 Boiler Pid is a dual boiler espresso cappuccino machines with Pid temperature control.
Better temperature stability with the dedicated and independent espresso boiler and Pid control.
Better and increased level of steam pressure and hot water suppy throught the dedicated and independent service boiler controlled by Pid.
Full Commercial rotary pump and the option of direct water connection or water tank supply complete the technical advanced main characteristics.
Stainless steel shiny body. (AISI 304)
Press forged chromed brass groups with valves infusion chamber
Dual boiler system for optimum coffe and steam / hot water performances
Coffee Boiler: 0,6 lt (1000W – 220-240Vac) – (850W – 120Vac)
Sevice boiler: 1,8 lt (1300W – 220-240Vac) – (850W – 120Vac)
Water supply 2.9 litre fresh water reservoir or alternatively by turning the control switch, steel braided direct water connection
Electronic control reservoir water level
Electronic automatic water level
Electronic control of the boiler water level
Anti – vacuum valve
Steam wand anti sunburn
Hot water outlet anti burn
Manometer for the boiler pressure control
Gauge for pump pressure control
Manual reset safety thermostat
Width / depth / height 300 x 430 x 425 mm.
Power feeding 220-240 Volt 50Hz – 120 Volt 60Hz
Absorbed power 2400 W – 220-240 Volt 50Hz – 1800 W – 120 Volt 60Hz
BREWING PRESSURE PROFILING CONTROL
The pressure gauge set on the group, allows to read the brewing pressure profiling of the espresso. Thanks to this instruction the barman can verify the exact milling, pressing and dose of the coffee in the filter.
If the brewing pressure is lower than the pump calibration (9 bar is our company setting), it means that the grinding is coarse, or the coffee is not pressed correctly, or the dose is not enough.